Skip to main content

Educational content only. Not a substitute for medical advice. Always consult a qualified clinician.

Selank / Semax nootropic research blend

Selank / Semax Blend

Research blend of Selank (5 mg) + Semax (5 mg) supplied as a lyophilized single-vial preparation, 10 mg total peptide mass

Early Human EvidenceResearch use only — no approved clinical indicationLast updated 2026-07-21
Overview

The Selank / Semax Blend is a two-component neuro-nootropic research blend combining 5 mg of Selank and 5 mg of Semax in a single lyophilized vial (10 mg total). Both compounds come from the same Russian regulator-peptide tradition at the Institute of Molecular Genetics of the Russian Academy of Sciences — the Myasoedov group's Pro-Gly-Pro C-terminal extension strategy applied to two different parent sequences. Selank is derived from tuftsin (the natural IgG-derived immune-modulator tetrapeptide) and delivers anxiolysis; Semax is derived from ACTH(4-10) and delivers cognitive activation. Both are approved medicines in Russia and some CIS countries in their individual forms (see the component pages for the full regulatory picture); neither is FDA- or EMA-authorised. The blend format itself has no regulatory authorisation anywhere.

The mechanistic pairing is coherent. Selank acts primarily as a positive allosteric modulator at a benzodiazepine-independent site on the GABA-A receptor — the same receptor family benzodiazepines engage, but at a different binding site and with a fundamentally different pharmacology (no sedation, no cognitive impairment, no dependence). Semax acts primarily through ACTH(4-10)-derived upregulation of BDNF and NGF gene expression, driving cognitive activation and neuroplasticity. The two act on non-overlapping receptor systems and produce no pharmacological conflict. In the blend, Selank calms and Semax activates — covering both ends of the stress-cognition spectrum simultaneously.

Practical use follows two documented routes from the source PDF. For subcutaneous injection: reconstitute the 10 mg total vial with 2.0 mL of bacteriostatic water to give 2.5 mg/mL of each component. For intranasal: reconstitute with 2.0 mL of sterile saline (rather than bacteriostatic water; the different diluent reflects the sensitivity of nasal mucosa) at the same concentration. In either format the reference dose is 0.1–0.2 mL (0.25–0.5 mg of each component), delivered 1–2 times per day. The reference cycling framework is 4–8 weeks on with a 2–4 week washout.

Blend-specific human trial evidence does not exist. Component-level evidence (Russian clinical registrations for both compounds; see Selank and Semax pages) supports the individual peptides but has not been combined into a randomised placebo-controlled trial of the specific two-way combination. Consumer discussions that treat combined component evidence as if it were combination trial evidence are conflating two different things. That framing distinction should be preserved.

Quick Facts & Evidence
Category
Selank / Semax nootropic research blend
Research area
Research blend
Most studied for
  • Anxiety reduction without sedation (Selank contribution)
  • Focus, working memory and cognitive support (Semax contribution)
  • Combined stress-cognition support
  • Neurogenesis and neuroplasticity contexts
Clinical status
Research use only — no approved clinical indication
Human evidence
Early Human Evidence
Regulatory status
Individual components have Russian regulatory registrations for their approved indications; the blend format does not.

Early Human Evidence

Small-scale human studies, observational data, or off-label case reports only. Substantial uncertainty remains.

Research Protocols

Research Protocol Snapshot

Preparation covered on this page

Freeze-dried injectable research format (two-component blend)

This page covers the RUO lyophilized Selank + Semax blend vial reconstituted with bacteriostatic water for subcutaneous research use, following the standard Healthy Mango preparation convention. A parallel intranasal preparation with sterile saline is documented separately in the Reported Dosing accordion.

Selank / Semax Blend research values at a glance.

ItemExample value
Vial size10 mg total (Selank 5 mg + Semax 5 mg)
Liquid used to mix (subQ)Bacteriostatic water
Liquid used to mix (intranasal)Sterile saline
Amount of liquid added2.0 mL
Final concentration (each ingredient)2.5 mg/mL of Selank and 2.5 mg/mL of Semax
How it's givenSubcutaneous injection or intranasal (dual documented route)
Research dose0.25–0.5 mg of each ingredient per injection
Frequency1–2× per day
Cycling4–8 weeks on / 2–4 week washout
Reported Dosing

The practitioner-reference research protocol for the Selank / Semax Blend is 0.25–0.5 mg of each ingredient per injection, 1–2 times per day, run in 4–8 week cycles with a 2–4 week washout. Two routes are documented: subcutaneous (bacteriostatic water) and intranasal (sterile saline). It is educational reference, not a recommendation.

The Reported Protocol

DoseFrequencyDurationNotes
0.25–0.5 mg each (Selank + Semax)1–2× per day, subcutaneous4–8 weeks on / 2–4 week washout0.1–0.2 mL at 2.5 mg/mL each; single injection delivers both
0.25–0.5 mg each (Selank + Semax)1–2× per day, intranasal (sterile saline)4–8 weeks on / 2–4 week washoutIntranasal reconstitution uses sterile saline; volume equivalence identical (2.0 mL total)

Why protocols vary

The two ingredients act on non-overlapping receptor systems (Selank on GABA-A; Semax on BDNF/NGF gene expression) and produce no pharmacological conflict, so the same volume delivers both without dose-splitting adjustments.

The subQ vs intranasal choice is a route choice, not a dose choice. The practitioner reference documents both routes explicitly and both use the same per-ingredient dose range; only the diluent chemistry differs (bacteriostatic water for subQ, sterile saline for intranasal).

The Pro Tip in the source chapter suggests a timing-optimised split — Semax in the morning (activating), Selank in the evening (calming). The blend format is most convenient when taken as a single combined mid-morning dose.

Preparing the Solution

Turning the freeze-dried blend into a measurable liquid.

Blend composition

10 mg total peptide (Selank 5 mg + Semax 5 mg)

The vial holds two lyophilized peptides in the same cake. Reconstituting the vial dissolves both at once; a single injection volume delivers both ingredients in parallel.

  • Selank

    Mass in vial
    5 mg
    Share of total
    50%
    Concentration after mixing
    2.5 mg/mL
    Reported per-injection dose
    0.25–0.5 mg per injection
  • Semax

    Mass in vial
    5 mg
    Share of total
    50%
    Concentration after mixing
    2.5 mg/mL
    Reported per-injection dose
    0.25–0.5 mg per injection

One reconstitution, one injection volume — both ingredients arrive together. The Preparation Calculator below reads the total blend mass; the ingredient split above explains how that total splits.

Documented in the practitioner reference (chapter 26)

Documented preparation

The documented research protocol is based on this preparation concentration.

Freeze-dried powder: 10 mg blend vial (5 mg Selank + 5 mg Semax)

Diluent: 2.0 mL bacteriostatic water

Final concentration: 5 mg/mL total (2.5 mg/mL each)

Vial and volume from the practitioner reference; concentration calculated · Research-practitioner guide

Your vial

Matching preparation

Bacteriostatic water

2mL

Resulting concentration

5 mg/mL

Equivalent volume

The reported research amount of 0.5–1 mg is contained within

0.1–0.2mL

of the prepared solution now in your vial.

Show calculation
Documented concentration
10 mg ÷ 2 mL = 5 mg/mL
Bacteriostatic water to match the documented concentration
10 mg ÷ 5 mg/mL = 2 mL
Equivalent volume at this concentration
0.5–1 mg ÷ 5 mg/mL = 0.1–0.2 mL

This tool performs arithmetic conversions using the preparation example and reported research amount shown on this page. It does not recommend an amount, route, preparation method, or use.

This tool performs arithmetic conversions using the preparation example and reported research amount shown on this page. It does not recommend an amount, route, preparation method, or use.

Sources for these values

  • Documented in the practitioner reference (total-blend arithmetic; ingredient split shown above)Research-practitioner guide

This example explains how concentration and volume are calculated for the standard RUO blend preparation. It is not a preparation guide.

How It's Given

Method used for this format

Subcutaneous injection or intranasal spray, 1–2× per day

Documented in the practitioner reference · Research-practitioner guide

Why this method

Both Selank and Semax are short peptides that would be degraded by gastrointestinal proteolysis; the subcutaneous route delivers them into circulation intact.

Intranasal is documented in the source chapter because both compounds have Russian regulatory registration in intranasal form; the two routes are pharmacologically interchangeable at the doses used, but the diluent chemistry differs (bacteriostatic water for subQ, sterile saline for intranasal).

Injection sites reported

  • Abdomen (rotate sites)
  • Front of the thigh
  • Avoid scarred, bruised, inflamed, or infected skin
Storage

Before mixing

  • Refrigerate 2–8 °C
  • Protect from light
  • Do not freeze

General RUO practice · Research-practitioner guide

After mixing (subQ, BAC water)

  • Refrigerate 2–8 °C
  • Use within 7–10 days
  • Do not freeze
  • Discard if cloudy or discoloured

General RUO practice · Research-practitioner guide

After mixing (intranasal, sterile saline)

  • Refrigerate 2–8 °C
  • Use within the shorter of 7 days or the saline diluent's supplied window (sterile saline has no bacteriostatic agent)
  • Do not freeze
  • Discard if cloudy or discoloured

General RUO practice · Research-practitioner guide

Handling

  • Direct diluent slowly down the vial wall
  • Gently swirl until dissolved — do not shake
  • New sterile needle each draw
  • Do not share vials

General RUO practice · Research-practitioner guide

Storage guidance summarises standard RUO peptide handling. The intranasal preparation uses sterile saline, which lacks the preservative built into bacteriostatic water — the useful window after mixing is correspondingly shorter.

Common Cycle

The practitioner reference frames the Selank / Semax Blend as 4–8 week active cycles followed by a 2–4 week washout.

Cycle Length
4–8 weeks on per cycle
Break Before the Next Cycle
2–4 week washout between cycles
What the Research Shows
Blend-specific long-term follow-up trials do not exist; individual component follow-ups (Selank and Semax) run under Russian regulatory frameworks and are documented on the component pages

Documented in the practitioner reference · Research-practitioner guide

The individual components have Russian regulatory registration for their approved indications; the blend format itself has no regulatory approval anywhere and no blend-specific randomised placebo-controlled trial has been published.

Compound Overview

Current areas of research

Component-level effects and grey-market experience.

  • Anxiolytic effects from Selank within hours (without benzodiazepine-style sedation)
  • Cognitive improvements from Semax over 1–2 weeks (activation and neuroplasticity)
  • Combined: calm clarity without grogginess
  • No dependency or withdrawal signature reported
Mechanism of action

The Selank / Semax Blend is a two-component neuro-nootropic research blend combining 5 mg of Selank and 5 mg of Semax in a single lyophilized vial (10 mg total). Both compounds come from the same Russian regulator-peptide tradition at the Institute of Molecular Genetics of the Russian Academy of Sciences — the Myasoedov group's Pro-Gly-Pro C-terminal extension strategy applied to two different parent sequences. Selank is derived from tuftsin (the natural IgG-derived immune-modulator tetrapeptide) and delivers anxiolysis; Semax is derived from ACTH(4-10) and delivers cognitive activation. Both are approved medicines in Russia and some CIS countries in their individual forms (see the component pages for the full regulatory picture); neither is FDA- or EMA-authorised. The blend format itself has no regulatory authorisation anywhere.

The mechanistic pairing is coherent. Selank acts primarily as a positive allosteric modulator at a benzodiazepine-independent site on the GABA-A receptor — the same receptor family benzodiazepines engage, but at a different binding site and with a fundamentally different pharmacology (no sedation, no cognitive impairment, no dependence). Semax acts primarily through ACTH(4-10)-derived upregulation of BDNF and NGF gene expression, driving cognitive activation and neuroplasticity. The two act on non-overlapping receptor systems and produce no pharmacological conflict. In the blend, Selank calms and Semax activates — covering both ends of the stress-cognition spectrum simultaneously.

Practical use follows two documented routes from the source PDF. For subcutaneous injection: reconstitute the 10 mg total vial with 2.0 mL of bacteriostatic water to give 2.5 mg/mL of each component. For intranasal: reconstitute with 2.0 mL of sterile saline (rather than bacteriostatic water; the different diluent reflects the sensitivity of nasal mucosa) at the same concentration. In either format the reference dose is 0.1–0.2 mL (0.25–0.5 mg of each component), delivered 1–2 times per day. The reference cycling framework is 4–8 weeks on with a 2–4 week washout.

Blend-specific human trial evidence does not exist. Component-level evidence (Russian clinical registrations for both compounds; see Selank and Semax pages) supports the individual peptides but has not been combined into a randomised placebo-controlled trial of the specific two-way combination. Consumer discussions that treat combined component evidence as if it were combination trial evidence are conflating two different things. That framing distinction should be preserved.

  • Two-component Russian regulator-peptide blend: Selank 5 mg + Semax 5 mg = 10 mg total
  • Non-overlapping receptor systems — Selank at GABA-A (non-benzodiazepine site), Semax via BDNF / NGF upregulation
  • Dual documented routes — subcutaneous (BAC water) or intranasal (sterile saline); no blend-specific human trial validation
Human research

No blend-specific research literature exists. The relevant evidence lives at the component level: Selank (Myasoedov 2011 developer review; Kozlovskaya 2001 clinical) and Semax (Gusev / Skvortsova stroke work; Myasoedov review). See the individual compound pages.

  • Myasoedov 2011 (Selank / Semax developer review)

    Consolidating review from the compound's original developer covering both Selank and Semax design principles.

  • Kozlovskaya 2001 (Selank GAD)

    Representative Selank clinical evidence.

  • Gusev / Skvortsova (Semax stroke)

    Representative Semax clinical evidence in acute stroke.


The blend format has no regulatory authorisation anywhere. Individual components have Russian regulatory registrations (see the Selank and Semax pages).

No blend-specific human trial has been published.

Safety considerations

Component-level and grey-market experience.

  • Mild nasal irritation (intranasal route)
  • Mild injection-site reactions (subQ route)
  • Possible mild drowsiness from Selank at higher doses
  • Long-term safety of the specific two-way combination not characterised

Component-level warnings apply.

  • Active cancer — BDNF is a growth factor (Semax-related)
  • Seizure disorders — theoretical caution
  • Concurrent benzodiazepines — additive GABA-A effects
  • Pregnancy and breastfeeding
  • Hypersensitivity to either component

Monitoring

  • Nasal mucosa tolerability (intranasal)
  • Injection-site reactions (subQ)
  • Anxiety and cognitive response
Frequently asked questions
  • Is this the same as taking Selank and Semax separately?

    Pharmacologically — very close. The blend is a convenience: one reconstitution, one dose, both components delivered together. What you cannot do with the blend that you can with separate vials is titrate the two components independently (e.g. more Semax and less Selank on high-stress days, or vice versa). For most maintenance uses the blend is more convenient; for cases requiring individual titration, separate vials give more control.

  • Why the two different diluents?

    For subcutaneous injection, bacteriostatic water is the standard peptide-therapy diluent because the small amount of benzyl alcohol prevents bacterial growth in the vial across multiple withdrawals. For intranasal use, sterile saline is preferred because the nasal mucosa is more sensitive to preservatives and buffering agents. The concentration is the same either way; only the diluent changes with the intended route.

  • Does the blend interact with benzodiazepines?

    The Selank component is a positive allosteric modulator at a benzodiazepine-independent GABA-A site. Concurrent benzodiazepine use produces additive GABA-A effects. In Russian clinical practice Selank has actually been studied as a benzodiazepine-taper support agent, but any co-administration is a clinical judgment rather than a routine combination.

  • What's the difference between the calming and activating effects?

    Selank engages GABA-A signalling for anxiolysis — the same neurotransmitter system that benzodiazepines act on, but at a different binding site that avoids the sedation and dependency profile of benzodiazepines. Semax engages BDNF and NGF gene expression via an ACTH(4-10)-derived mechanism, driving cognitive activation and neuroplasticity. The two systems are pharmacologically non-overlapping, which is why the combination produces calm clarity rather than either sedation or agitation.

  • Can I use the blend chronically without cycling?

    The PDF reference cycling framework is 4–8 weeks on with a 2–4 week washout. That reflects the general Russian regulator-peptide approach to defined-duration courses rather than continuous chronic use. Whether continuous use would be safe long-term is not characterised at scale. The cycling framework is a reasonable conservative default.

References
  1. [1]

    Regulatory peptides Selank and Semax — a developer's consolidating review of design principles, chemistry and clinical evidenceMyasoedov NF, Russian Journal of Bioorganic Chemistry / review (2011)

  2. [2]

    Clinical efficacy of Selank in generalised anxiety disorder and neurasthenia — a representative Russian clinical studyKozlovskaya MM, Kozlovskii II, Val'dman EA, Seredenin SB, Zhurnal Nevrologii i Psikhiatrii imeni S.S. Korsakova (2001)

  3. [3]

    Semax 1% intranasal solution in acute ischaemic stroke — Moscow clinical program supporting the Russian registrationGusev EI, Skvortsova VI, Miasoedov NF, et al., Zhurnal Nevrologii i Psikhiatrii imeni S.S. Korsakova (2005)

  4. [4]

    Peptides & Compounds — The No-Jargon Guide (v5)Healthy Mango Editorial, Healthy Mango practitioner reference (2026)

Laboratory Reference Notice

This section summarizes procedures and study parameters reported in published scientific literature and laboratory protocols. It is provided for educational and research reference only and must not be interpreted as medical advice, clinical guidance, or instructions for personal use.

Editorial review pending

This page has not yet undergone external editorial review. Content is drawn from published sources and may be updated as review completes.

Question

Other questions that touch the same biology, evidence, or laboratory concepts.